home *** CD-ROM | disk | FTP | other *** search
/ Workbench Design / WB Collection.iso / workbench werkzeuge / bootpicturetools / bootscreen / readme_first < prev    next >
Text File  |  1996-04-07  |  2KB  |  56 lines

  1.  
  2. BOOTSCREEN
  3. ~~~~~~~~~~
  4. Startup screen program for Amigas with Workbench release 37 (2.04) or higher.
  5.  
  6.  
  7. Copyright ©1994 by Joseph Luk.  All rights reserved.
  8.  
  9. ----------------------------------------------------------- README FIRST FILE
  10.  
  11.  
  12. You will notice that there's no runnable program here.  To try out BootScreen,
  13. you must install it using the Install script.  Don't be afraid to do this,
  14. because I have thoughtfully provided an UnInstall ("Remove") script that
  15. will undo the Install for you in one quick pass.
  16.  
  17.  
  18. You may install the program right now -- it doesn't take much space, and
  19. the procedure is quick and easy.  All you need to remember is to read the
  20. help texts.  Once that's done, just go into your Prefs drawer and run the
  21. new BootScreen editor you'll have there.  Load up a picture, save, and reboot.
  22.  
  23. That's it!  You will, of course, want to read the documentation.
  24.  
  25.  
  26.  
  27. TROUBLESHOOTING
  28. ~~~~~~~~~~~~~~~
  29. If you have a problem running the Install scripts, chances are you don't
  30. have the Installer program on your hard disk.  This can be acquired from
  31. any one of the following sources:
  32.    * Original Install 2.1 or Install 3.0 disk from Commodore -- you'll find
  33.      it on the root directory.
  34.    * Commodore Installer distribution (GEnie file #21301).
  35.    
  36. All you need to do is copy the program (it's called 'Installer') to your
  37. C: directory and leave it there.  More and more programs use the Installer
  38. nowadays, so it's good to have it on your hard disk.
  39.  
  40. It is known that the version of Installer provided with Octree's Caligari24
  41. software fails to compile the script.  You are best off using the Commodore
  42. installer from your original Workbench disk set.
  43.  
  44.  
  45. ----
  46.  
  47. BootScreen V2.2 is ShareWare.  It's not GimmeMoneyWare.  I've spent a good
  48. deal of time on this project, and hope that at least some people will show
  49. their appreciation for my work with a very small donation.  This isn't to
  50. make money, this is to see if the Amiga community still supports its
  51. starving students.  There are no annoying nag screens or disabled features
  52. in this demo version; I felt that the first step with you trusting me
  53. with your money would be for me to trust you with my program.
  54.  
  55. Registration instructions can be found at the end of both the BootScreen.doc
  56. and BootScreen.readme files.  Thanks!